ESPLCD Screen
| Info | |
|---|---|
| Download: | Sketchup STL |
| Print time | 01h 48m 50s |
| Filament used | 8.25m |
| Filament cost | $0.47 |
| Quantity | 1 |
| Prototypes | 3 |
Thankfully this one was not terrible to create because I had already made and tested the LCD - HDMI Screen. For all intents and purposes, this is the same model.
To get it to fit the slightly different dimensions of the screen, the only things that had to be adjusted were the screw hole mounting offsets, screen offsets, and side openings. The side openings were a bit tricky which led to creating three different prototypes. The first prototype, I guess due to some measuring error, had the button hole several mm away from where it needed to be. That wasn’t a big deal because the side holes for the power/HDMI in were also a bit off (I guess it’s impossible for me to hit everything right on the money on the first try). As is typical, the second prototype brought everything much closer to where it needed to be while the third was the final dial-in prototype.
Wireframe: Edges: Autorotate: