LCD - Touch Mount
| Info | |
|---|---|
| Download: | Sketchup STL |
| Print time | 02h 00m 58s |
| Filament used | 5.23m 15.690000000000001 |
| Filament cost | $0.30 $0.89 |
| Quantity | 3 |
| Prototypes | 2 |
After having built the LCD touch screen bezel, and after having learned lots of lessons from the holster with screen model, this one couldn’t have been easier. It simply needed to align the holes with the underside of the touch screen mounting points. One thing detected early on with the design is that an access hole would be needed from the underside in order to screw the screen and mount into the LCD touch screen bezel. It was a good catch during design phase because missing that detail would have required a fix in another prototype.
With such a simple design, this one almost got away with just a single prototype before production. Everything fit fine on the first go - but I didn’t like the positioning of the mounting holes to the board, so I adjusted them a bit for the next prototype and also added a few angles to the overall design.
Unfortunately, because there is so little material connecting the mount to the monitor, I suffered a breakage of one of the parts during assembly. I might need to revisit this design!
Wireframe: Edges: Autorotate: