LCD - Touch Screen
| Info | |
|---|---|
| Download: | Sketchup STL |
| Print time | 03h 47m 47s |
| Filament used | 16.67m 33.34 |
| Filament cost | $0.94 $1.89 |
| Quantity | 2 |
| Prototypes | 3 |
While the LCD - HDMI Screen kinda kicked my butt with its design, these larger touch screens were a piece of comparative cake. Since the smaller design was set and proven, this design only required adjustments for the scale and the openings.
This should have been a one-prototype build, but the manufacturer did not publish specs for the screen so all measurements were manual. Given the manual measurements, the classic first swag/dial in/fine tune prototype design approach played out. Interestingly, the thing that gave me the most trouble for these bezels was the tendency for the print to warp and curl away from the print bed. This was especially apparent because I twisted the model 45 degrees on the print bed so the lines would be running parallel to the long side of the print. As those that have printed a while know: long lines = more curling tendency, especially on the corners.
Wireframe: Edges: Autorotate: